Help is available by moving the cursor above any 
symbol or by checking MAQAO website.
[ 0 / 9 ] Compilation options are not available
Compilation options are an important optimization leverage but ONE-View is not able to analyze them.
[ 4 / 4 ] Application profile is long enough (48.48 s)
To have good quality measurements, it is advised that the application profiling time is greater than 10 seconds.
[ 2 / 2 ] Application is correctly profiled ("Others" category represents 0 % of the execution time)
To have a representative profiling, it is advised that the category "Others" represents less than 20% of the execution time in order to analyze as much as possible of the user code
[ 4 / 4 ] Enough time of the experiment time spent in analyzed loops (80.83%)
If the time spent in analyzed loops is less than 30%, standard loop optimizations will have a limited impact on application performances.
[ 4 / 4 ] Loop profile is not flat
At least one loop coverage is greater than 4% (22.25%), representing an hotspot for the application
[ 4 / 4 ] Enough time of the experiment time spent in analyzed innermost loops (64.43%)
If the time spent in analyzed innermost loops is less than 15%, standard innermost loop optimizations such as vectorisation will have a limited impact on application performances.
[ 3 / 3 ] Less than 10% (0%) is spend in BLAS1 operations
It could be more efficient to inline by hand BLAS1 operations
[ 3 / 3 ] Cumulative Outermost/In between loops coverage (16.40%) lower than cumulative innermost loop coverage (64.43%)
Having cumulative Outermost/In between loops coverage greater than cumulative innermost loop coverage will make loop optimization more complex
[ 2 / 2 ] Less than 10% (0%) is spend in Libm/SVML (special functions)
[ 2 / 2 ] Less than 10% (0%) is spend in BLAS2 operations
BLAS2 calls usually could make a poor cache usage and could benefit from inlining.
| Loop ID | Module | Analysis | Penalty Score | Coverage (%) | Vectorization Ratio (%) | Vector Length Use (%) |
|---|---|---|---|---|---|---|
| ►1830 | libgromacs_mpi.so.7 | Partial or unexisting vectorization - Use pragma to force vectorization and check potential dependencies between array access. | 298 | 22.25 | 94.33 | 95.08 |
| ○ | [SA] Presence of expensive FP instructions - Perform hoisting, change algorithm, use SVML or proper numerical library or perform value profiling (count the number of distinct input values). There are 64 issues (= instructions) costing 4 points each. | 256 | ||||
| ○ | [SA] Presence of special instructions executing on a single port (BROADCAST) - Simplify data access and try to get stride 1 access. There are 16 issues (= instructions) costing 1 point each. | 16 | ||||
| ○ | [SA] Presence of constant non unit stride data access - Use array restructuring, perform loop interchange or use gather instructions to lower a bit the cost. There are 7 issues ( = data accesses) costing 2 point each. | 14 | ||||
| ○ | [SA] Presence of indirect accesses - Use array restructuring or gather instructions to lower the cost. There are 2 issues ( = indirect data accesses) costing 4 point each. | 8 | ||||
| ○ | [SA] Inefficient vectorization: use of shorter than available vector length - Force compiler to use proper vector length. CAUTION: use of 512 bits vectors could be more expensive than 256 bits on some processors. Use intrinsics (costly and not portable). The issue costs 2 points. | 2 | ||||
| ○ | [SA] More than 20% of the loads are accessing the stack - Perform loop splitting to decrease pressure on registers. This issue costs 2 points. | 2 | ||||
| ○ | Warning! There is no dynamic data for this loop. Some checks can not been performed. | 0 | ||||
| ►1834 | libgromacs_mpi.so.7 | Partial or unexisting vectorization - Use pragma to force vectorization and check potential dependencies between array access. | 298 | 7.93 | 94.06 | 94.84 |
| ○ | [SA] Presence of expensive FP instructions - Perform hoisting, change algorithm, use SVML or proper numerical library or perform value profiling (count the number of distinct input values). There are 64 issues (= instructions) costing 4 points each. | 256 | ||||
| ○ | [SA] Presence of special instructions executing on a single port (BROADCAST) - Simplify data access and try to get stride 1 access. There are 16 issues (= instructions) costing 1 point each. | 16 | ||||
| ○ | [SA] Presence of constant non unit stride data access - Use array restructuring, perform loop interchange or use gather instructions to lower a bit the cost. There are 7 issues ( = data accesses) costing 2 point each. | 14 | ||||
| ○ | [SA] Presence of indirect accesses - Use array restructuring or gather instructions to lower the cost. There are 2 issues ( = indirect data accesses) costing 4 point each. | 8 | ||||
| ○ | [SA] Inefficient vectorization: use of shorter than available vector length - Force compiler to use proper vector length. CAUTION: use of 512 bits vectors could be more expensive than 256 bits on some processors. Use intrinsics (costly and not portable). The issue costs 2 points. | 2 | ||||
| ○ | [SA] More than 20% of the loads are accessing the stack - Perform loop splitting to decrease pressure on registers. This issue costs 2 points. | 2 | ||||
| ○ | Warning! There is no dynamic data for this loop. Some checks can not been performed. | 0 | ||||
| ►14989 | libgromacs_mpi.so.7 | Partial or unexisting vectorization - Use pragma to force vectorization and check potential dependencies between array access. | 4 | 6.01 | 0 | 25 |
| ○ | [SA] Presence of constant non unit stride data access - Use array restructuring, perform loop interchange or use gather instructions to lower a bit the cost. There are 2 issues ( = data accesses) costing 2 point each. | 4 | ||||
| ►14752 | libgromacs_mpi.so.7 | Partial or unexisting vectorization - Use pragma to force vectorization and check potential dependencies between array access. | 80 | 4.32 | 59.91 | 49.91 |
| ○ | [SA] Too many paths (74 paths) - Simplify control structure. There are 74 issues ( = paths) costing 1 point each with a malus of 4 points. | 78 | ||||
| ○ | [SA] Non innermost loop (Outermost) - Collapse loop with innermost ones. This issue costs 2 points. | 2 | ||||
| ○ | Warning! Some static analysis are missing because the loop has too many paths. Use a higher value for --maximal_path_number option. | 0 | ||||
| ►3126 | libgromacs_mpi.so.7 | Partial or unexisting vectorization - Use pragma to force vectorization and check potential dependencies between array access. | 20 | 3.74 | 0 | 18.52 |
| ○ | [SA] Too many paths (16 paths) - Simplify control structure. There are 16 issues ( = paths) costing 1 point each with a malus of 4 points. | 20 | ||||
| ○ | Warning! Some static analysis are missing because the loop has too many paths. Use a higher value for --maximal_path_number option. | 0 | ||||
| ►1837 | libgromacs_mpi.so.7 | Partial or unexisting vectorization - Use pragma to force vectorization and check potential dependencies between array access. | 438 | 3.51 | 92.48 | 93.45 |
| ○ | [SA] Presence of expensive FP instructions - Perform hoisting, change algorithm, use SVML or proper numerical library or perform value profiling (count the number of distinct input values). There are 96 issues (= instructions) costing 4 points each. | 384 | ||||
| ○ | [SA] Presence of special instructions executing on a single port (BROADCAST) - Simplify data access and try to get stride 1 access. There are 32 issues (= instructions) costing 1 point each. | 32 | ||||
| ○ | [SA] Presence of constant non unit stride data access - Use array restructuring, perform loop interchange or use gather instructions to lower a bit the cost. There are 9 issues ( = data accesses) costing 2 point each. | 18 | ||||
| ○ | [SA] Inefficient vectorization: use of shorter than available vector length - Force compiler to use proper vector length. CAUTION: use of 512 bits vectors could be more expensive than 256 bits on some processors. Use intrinsics (costly and not portable). The issue costs 2 points. | 2 | ||||
| ○ | [SA] More than 20% of the loads are accessing the stack - Perform loop splitting to decrease pressure on registers. This issue costs 2 points. | 2 | ||||
| ○ | Warning! There is no dynamic data for this loop. Some checks can not been performed. | 0 | ||||
| ►14910 | libgromacs_mpi.so.7 | Partial or unexisting vectorization - Use pragma to force vectorization and check potential dependencies between array access. | 23 | 2.6 | 0 | 13.46 |
| ○ | [SA] Too many paths (17 paths) - Simplify control structure. There are 17 issues ( = paths) costing 1 point each with a malus of 4 points. | 21 | ||||
| ○ | [SA] Non innermost loop (InBetween) - Collapse loop with innermost ones. This issue costs 2 points. | 2 | ||||
| ○ | Warning! Some static analysis are missing because the loop has too many paths. Use a higher value for --maximal_path_number option. | 0 | ||||
| ○14787 | libgromacs_mpi.so.7 | Partial or unexisting vectorization - No issue detected | 0 | 2.28 | 0 | 12.5 |
| ►14921 | libgromacs_mpi.so.7 | Partial or unexisting vectorization - Use pragma to force vectorization and check potential dependencies between array access. | 43 | 2.01 | 65.44 | 39.25 |
| ○ | [SA] Too many paths (37 paths) - Simplify control structure. There are 37 issues ( = paths) costing 1 point each with a malus of 4 points. | 41 | ||||
| ○ | [SA] Non innermost loop (InBetween) - Collapse loop with innermost ones. This issue costs 2 points. | 2 | ||||
| ○ | Warning! Some static analysis are missing because the loop has too many paths. Use a higher value for --maximal_path_number option. | 0 | ||||
| ►14940 | libgromacs_mpi.so.7 | Partial or unexisting vectorization - Use pragma to force vectorization and check potential dependencies between array access. | 28 | 1.49 | 3.03 | 13.64 |
| ○ | [SA] Presence of indirect accesses - Use array restructuring or gather instructions to lower the cost. There are 6 issues ( = indirect data accesses) costing 4 point each. | 24 | ||||
| ○ | [SA] Presence of constant non unit stride data access - Use array restructuring, perform loop interchange or use gather instructions to lower a bit the cost. There are 1 issues ( = data accesses) costing 2 point each. | 2 | ||||
| ○ | [SA] Several paths (2 paths) - Simplify control structure or force the compiler to use masked instructions. There are 2 issues ( = paths) costing 1 point each. | 2 |