options

gmx_mpi - 2023-07-28 16:08:11 - MAQAO 2.17.7

Help is available by moving the cursor above any symbol or by checking MAQAO website.

Stylizer  

[ 4 / 4 ] Application profile is long enough (291.08 s)

To have good quality measurements, it is advised that the application profiling time is greater than 10 seconds.

[ 0 / 3 ] Optimization level option not used

To have better performances, it is advised to help the compiler by using a proper optimization level (-O2 of higher). Warning, depending on compilers, faster optimization levels can decrease numeric accuracy.

[ 0 / 3 ] Helper debug compilation options -g and -fno-omit-frame-pointer are missing

-g option gives access to debugging informations, such are source locations and -fno-omit-frame-pointer improve the accuracy of callchains found during the application profiling.

[ 0 / 3 ] Architecture specific options are not used

Architecture specific options are needed to produce efficient code for a specific processor ( -x(target) or -ax(target) ).

[ 2 / 2 ] Application is correctly profiled ("Others" category represents 0 % of the execution time)

To have a representative profiling, it is advised that the category "Others" represents less than 20% of the execution time in order to analyze as much as possible of the user code

Optimizer

Loop IDModuleAnalysisPenalty ScoreCoverage (%)Vectorization
Ratio (%)
Vector Length
Use (%)
1019libgromacs_mpi.so.7Inefficient vectorization.27639.69100100
[SA] Presence of expensive FP instructions - Perform hoisting, change algorithm, use SVML or proper numerical library or perform value profiling (count the number of distinct input values). There are 64 issues (= instructions) costing 4 points each.256
[SA] Inefficient vectorization: more than 10% of the vector loads instructions are unaligned - When allocating arrays, don’t forget to align them. There are 9 issues ( = arrays) costing 2 points each18
[SA] More than 20% of the loads are accessing the stack - Perform loop splitting to decrease pressure on registers. This issue costs 2 points.2
Warning! There is no dynamic data for this loop. Some checks can not been performed.0
1017libgromacs_mpi.so.7Inefficient vectorization.27616.72100100
[SA] Presence of expensive FP instructions - Perform hoisting, change algorithm, use SVML or proper numerical library or perform value profiling (count the number of distinct input values). There are 64 issues (= instructions) costing 4 points each.256
[SA] Inefficient vectorization: more than 10% of the vector loads instructions are unaligned - When allocating arrays, don’t forget to align them. There are 9 issues ( = arrays) costing 2 points each18
[SA] More than 20% of the loads are accessing the stack - Perform loop splitting to decrease pressure on registers. This issue costs 2 points.2
Warning! There is no dynamic data for this loop. Some checks can not been performed.0
1026libgromacs_mpi.so.7Inefficient vectorization.4046.09100100
[SA] Presence of expensive FP instructions - Perform hoisting, change algorithm, use SVML or proper numerical library or perform value profiling (count the number of distinct input values). There are 96 issues (= instructions) costing 4 points each.384
[SA] Inefficient vectorization: more than 10% of the vector loads instructions are unaligned - When allocating arrays, don’t forget to align them. There are 9 issues ( = arrays) costing 2 points each18
[SA] More than 20% of the loads are accessing the stack - Perform loop splitting to decrease pressure on registers. This issue costs 2 points.2
Warning! There is no dynamic data for this loop. Some checks can not been performed.0
23046libgromacs_mpi.so.7Partial or unexisting vectorization - Use pragma to force vectorization and check potential dependencies between array access.1012.5360.8736.96
[SA] Too many paths (95 paths) - Simplify control structure. There are 95 issues ( = paths) costing 1 point each with a malus of 4 points.99
[SA] Non innermost loop (Outermost) - Collapse loop with innermost ones. This issue costs 2 points.2
Warning! Some static analysis are missing because the loop has too many paths. Use a higher value for --maximal_path_number option.0
1024libgromacs_mpi.so.7Inefficient vectorization.4042.45100100
[SA] Presence of expensive FP instructions - Perform hoisting, change algorithm, use SVML or proper numerical library or perform value profiling (count the number of distinct input values). There are 96 issues (= instructions) costing 4 points each.384
[SA] Inefficient vectorization: more than 10% of the vector loads instructions are unaligned - When allocating arrays, don’t forget to align them. There are 9 issues ( = arrays) costing 2 points each18
[SA] More than 20% of the loads are accessing the stack - Perform loop splitting to decrease pressure on registers. This issue costs 2 points.2
Warning! There is no dynamic data for this loop. Some checks can not been performed.0
22649libgromacs_mpi.so.7Partial or unexisting vectorization - Use pragma to force vectorization and check potential dependencies between array access.261.9788.8979.17
[SA] Inefficient vectorization: more than 10% of the vector loads instructions are unaligned - When allocating arrays, don’t forget to align them. There are 6 issues ( = arrays) costing 2 points each12
[SA] Presence of constant non unit stride data access - Use array restructuring, perform loop interchange or use gather instructions to lower a bit the cost. There are 4 issues ( = data accesses) costing 2 point each.8
[SA] Presence of special instructions executing on a single port (INSERT/EXTRACT, BROADCAST) - Simplify data access and try to get stride 1 access. There are 4 issues (= instructions) costing 1 point each.4
[SA] Inefficient vectorization: use of shorter than available vector length - Force compiler to use proper vector length. CAUTION: use of 512 bits vectors could be more expensive than 256 bits on some processors. Use intrinsics (costly and not portable). The issue costs 2 points.2
Warning! There is no dynamic data for this loop. Some checks can not been performed.0
1020libgromacs_mpi.so.7Partial or unexisting vectorization - Use pragma to force vectorization and check potential dependencies between array access.3121.7898.9699.13
[SA] Presence of expensive FP instructions - Perform hoisting, change algorithm, use SVML or proper numerical library or perform value profiling (count the number of distinct input values). There are 64 issues (= instructions) costing 4 points each.256
[SA] Inefficient vectorization: more than 10% of the vector loads instructions are unaligned - When allocating arrays, don’t forget to align them. There are 12 issues ( = arrays) costing 2 points each24
[SA] Presence of constant non unit stride data access - Use array restructuring, perform loop interchange or use gather instructions to lower a bit the cost. There are 8 issues ( = data accesses) costing 2 point each.16
[SA] Presence of indirect accesses - Use array restructuring or gather instructions to lower the cost. There are 2 issues ( = indirect data accesses) costing 4 point each.8
[SA] Several paths (3 paths) - Simplify control structure or force the compiler to use masked instructions. There are 3 issues ( = paths) costing 1 point each.3
[SA] Inefficient vectorization: use of shorter than available vector length - Force compiler to use proper vector length. CAUTION: use of 512 bits vectors could be more expensive than 256 bits on some processors. Use intrinsics (costly and not portable). The issue costs 2 points.2
[SA] More than 20% of the loads are accessing the stack - Perform loop splitting to decrease pressure on registers. This issue costs 2 points.2
[SA] Presence of special instructions executing on a single port (BROADCAST) - Simplify data access and try to get stride 1 access. There are 1 issues (= instructions) costing 1 point each.1
Warning! There is no dynamic data for this loop. Some checks can not been performed.0
1018libgromacs_mpi.so.7Partial or unexisting vectorization - Use pragma to force vectorization and check potential dependencies between array access.3041.6199.0599.17
[SA] Presence of expensive FP instructions - Perform hoisting, change algorithm, use SVML or proper numerical library or perform value profiling (count the number of distinct input values). There are 64 issues (= instructions) costing 4 points each.256
[SA] Inefficient vectorization: more than 10% of the vector loads instructions are unaligned - When allocating arrays, don’t forget to align them. There are 11 issues ( = arrays) costing 2 points each22
[SA] Presence of constant non unit stride data access - Use array restructuring, perform loop interchange or use gather instructions to lower a bit the cost. There are 5 issues ( = data accesses) costing 2 point each.10
[SA] Presence of indirect accesses - Use array restructuring or gather instructions to lower the cost. There are 2 issues ( = indirect data accesses) costing 4 point each.8
[SA] Several paths (3 paths) - Simplify control structure or force the compiler to use masked instructions. There are 3 issues ( = paths) costing 1 point each.3
[SA] Inefficient vectorization: use of shorter than available vector length - Force compiler to use proper vector length. CAUTION: use of 512 bits vectors could be more expensive than 256 bits on some processors. Use intrinsics (costly and not portable). The issue costs 2 points.2
[SA] More than 20% of the loads are accessing the stack - Perform loop splitting to decrease pressure on registers. This issue costs 2 points.2
[SA] Presence of special instructions executing on a single port (BROADCAST) - Simplify data access and try to get stride 1 access. There are 1 issues (= instructions) costing 1 point each.1
Warning! There is no dynamic data for this loop. Some checks can not been performed.0
23034libgromacs_mpi.so.7Partial or unexisting vectorization - Use pragma to force vectorization and check potential dependencies between array access.10021.5826.6222.32
[SA] Too many paths (4057 paths) - Simplify control structure. There are 4057 issues ( = paths) costing 1 point, limited to 1000.1000
[SA] Non innermost loop (Outermost) - Collapse loop with innermost ones. This issue costs 2 points.2
Warning! Some static analysis are missing because the loop has too many paths. Use a higher value for --maximal_path_number option.0
1014libgromacs_mpi.so.7Partial or unexisting vectorization - Use pragma to force vectorization and check potential dependencies between array access.1261.477.3878.51
[SA] Too many paths (120 paths) - Simplify control structure. There are 120 issues ( = paths) costing 1 point each with a malus of 4 points.124
[SA] Non innermost loop (Outermost) - Collapse loop with innermost ones. This issue costs 2 points.2
Warning! Some static analysis are missing because the loop has too many paths. Use a higher value for --maximal_path_number option.0
×